1172 S Harbor is a coastal commercial property in Florida — a harbor-front building type that faces both the design demands of a waterfront commercial environment and the technical requirements of Florida's WBDR coastal glazing code. American Commercial Glass installed the impact-rated commercial glazing package — storefront, entry systems, and specialty glazing consistent with the property's harbor-front exposure and Florida Building Code requirements. Coastal commercial properties require marine-grade frame finishes, high-performance sealants, and impact systems rated to the improve design pressures of open-water coastal exposure.
| Project Detail | |
|---|---|
| Owner | Project team confidential |
| General Contractor | Project team confidential |
| Architect | Project team confidential |
| Location | Florida (coastal harbor-front — WBDR jurisdiction) |
| Building type | Coastal commercial — harbor-front |
| Systems | Impact-rated commercial storefront and entry systems |
| Manufacturer | Not disclosed |
| Code jurisdiction | Florida Building Code — WBDR coastal exposure. Florida Product Approval required. |
Harbor-front commercial properties in Florida occupy a distinctive position in the commercial glazing market: they require the full WBDR impact compliance framework of any coastal Florida commercial building, plus the additional durability requirements of a direct-water marine environment. Salt-air corrosion, UV intensity, thermal cycling from coastal temperature variation, and the improve design pressures of open-water exposure all impose requirements on the glazing specification at harbor-front commercial sites.
1172 S Harbor is a coastal commercial property on a harbor or waterway in Florida — a commercial building whose glazing faces directly into the marine environment. American Commercial Glass installed the commercial glazing package, providing impact-rated storefront and entry systems with Florida Product Approval for the WBDR coastal exposure.
Harbor-front exposure at a Florida coastal commercial site may produce Exposure Category C or D conditions under ASCE 7, depending on the size of the harbor or waterway. Design pressures at open-water coastal sites are higher than at inland locations of the same building height, and ACG confirmed the applicable exposure category and calculated design pressures for the 1172 S Harbor site before specifying systems.
Sealant and frame finish durability in a direct harbor-front environment requires products rated for marine salt-air exposure. ACG specified marine-grade sealants and Class 1 anodize or PVDF-coated frame finishes appropriate for the 1172 S Harbor coastal location.
Technical highlights of the 1172 S Harbor coastal commercial glazing scope:
Coastal commercial glazing installations require weather window planning — perimeter sealant application needs dry conditions, and wind conditions at open harbor-front sites can interrupt glass handling operations with large panels. ACG planned the 1172 S Harbor installation around weather conditions typical for the Florida coastal site, scheduling glass setting and sealant work during morning hours to avoid afternoon thunderstorms and peak wind conditions.
Coastal site access for material delivery may involve tidal flooding of access roads, limited staging area adjacent to the water, or boat traffic coordination at active marina locations. ACG assessed the 1172 S Harbor site access conditions before confirming the delivery schedule.
1172 S Harbor is a coastal commercial property on a harbor or waterway in Florida. ACG installed the impact-rated commercial glazing package — storefront, entry systems, and specialty glazing — appropriate for the property's harbor-front coastal exposure and Florida WBDR code requirements.
Harbor-front properties face direct open-water exposure — salt-air concentration, Exposure Category C or D design pressures, UV intensity, and coastal thermal cycling. Glazing for harbor-front commercial buildings requires marine-grade frame finishes (Class 1 anodize or PVDF coating), coastal-rated sealants, and impact systems rated to the improve DPs of open-water exposure. Standard inland WBDR specifications are not sufficient for direct harbor-front applications.
ASTM E1886 is the standard method for testing the performance of exterior windows, doors, and curtainwall under simulated windborne debris impact. ASTM E1996 is the specification for performance requirements for impact protective systems. Together they define the test methodology and pass criteria for Florida Product Approval of glazing systems for WBDR coastal use. (HVHZ uses TAS 201/202/203 instead.)
Harbor-front buildings in Florida may be assigned Exposure Category C (open terrain, including bodies of water with fetch distances greater than 1,500 feet) or Exposure D (large open water areas with fetch exceeding 5,000 feet). The specific exposure category depends on the harbor's size and orientation. ACG calculates the site-specific exposure category and DP for coastal commercial projects.
Yes. American Commercial Glass has completed glazing work at coastal commercial properties including marina-adjacent, harbor-front, and waterway-facing commercial buildings across Florida. Coastal commercial glazing — marine-grade finishes, coastal sealants, improve DP calculations — is a standard ACG capability.
PVDF (Kynar) paint coatings and Class 1 anodize (minimum 0.7 mil anodic film thickness) provide the best long-term corrosion resistance in Florida's coastal marine environments. Kynar coatings provide color stability and salt-air resistance superior to standard architectural paint. Class 1 anodize provides a durable oxide layer that resists pitting and corrosion in salt-air exposure. ACG specifies the appropriate finish for each project's coastal exposure level.