What Safety Standards Do Professional Commercial Glaziers Follow?

Professional commercial glaziers follow OSHA 1926 Subpart M (fall protection), ANSI Z97.1 and CPSC 16 CFR 1201 (safety glazing for hazardous locations), IBC 2406 (hazardous locations defined), and Florida Building Code safety glazing requirements. Plus written field protocols specific to the contractor. Here is what to verify before signing.

OSHA 1926 — fall protection and general construction safety

OSHA 1926 Subpart M requires fall protection at any work above 6 feet on construction sites. Commercial glazing crews working at curtain wall or storefront on multi-story buildings require harness, lanyard, and tie-off systems. Subpart L covers scaffolding. Subpart V covers electrical hazards. ACG documents fall-protection training for every field employee.

ANSI Z97.1 and CPSC 16 CFR 1201 — safety glazing material

ANSI Z97.1 and CPSC 16 CFR 1201 (Category I and Category II) classify safety glazing materials. Category II is the higher impact level required for storm-door glazing, athletic facilities, and other high-impact locations. Tempered and laminated glass both qualify as safety glazing when meeting the impact criteria.

IBC 2406 — hazardous locations

IBC 2406 defines hazardous locations where safety glazing is required: glass doors, panels adjacent to doors, glass at bathtubs and showers, panels with bottom edge less than 18 inches above floor, large panels (>9 sq ft) that meet specific criteria. Florida Building Code adopts and amends IBC 2406.

Florida Building Code safety glazing requirements

Florida Building Code Building 2406 (commercial) requires safety glazing at the hazardous locations defined in IBC. Permanent marking required on safety glazing identifying manufacturer, glass thickness, and applicable standard. ACG verifies safety glazing markings during punch and substantial completion.

Written field protocols

Beyond code, professional glaziers run written field protocols: pre-shift safety briefing, weekly toolbox talks, OSHA-required incident reporting, written fall-protection program, hot-work permits where required, lockout-tagout on electrical work, and PPE compliance documentation. ACG runs aviation-style pre-shift checklists on every site.

Frequently asked questions

What's ACG's documented safety record?

Zero OSHA recordable incidents since 2021. Written safety-checklist protocol on every site, modeled on aviation pre-flight. Documented training records for every field employee.

Does ACG require OSHA-10 or OSHA-30 training?

OSHA-10 minimum for every field employee. OSHA-30 for foremen and supervisors. Documented in personnel files.

What insurance does ACG carry for safety compliance?

$3M general liability current. Workers compensation per Florida statute. Documented certificate of insurance on request.