Commercial Storefront Installation in Florida Keys.

Florida Keys storefront work. Florida Keys commercial storefront projects in 2026 cover ground-floor retail in mixed-use buildings, restaurant entries with operating glass envelopes, and standalone commercial buildings ranging from professional offices to medical and institutional uses. ACG bids storefront systems for Florida Keys general contractors and restaurant operators with the full Division 08 scope: aluminum framing, single-source glazing, hardware coordination, and complete submittal documentation.

System selection in Florida Keys. Florida Keys is a wind-borne debris region, not the HVHZ, so commercial storefronts require Florida Product Approval configurations. ACG specifies storefront systems with the design pressure (DP) rating and exposure category appropriate for the Florida Keys site - typically Exposure D with elevated DP for direct ocean exposure. We source from manufacturers with current Florida documentation and direct factory engineering support.

Lead time and pricing in Florida Keys. Commercial storefront lead times run 10-16 weeks from approved shop drawings, with 3-7 days of field installation for a standard 30-foot storefront. Florida Keys oceanfront and direct-coastal sites run at the upper end of the range due to elevated design pressure requirements.

Florida Keys is not in the HVHZ. Every commercial storefront still needs Florida Product Approval for the specific framing, glass make-up, and anchorage configuration. ACG submittal packages include the current approval, installation instructions tied directly to that approval, engineer-stamped shop drawings where the project requires, and a field inspection log the GC can attach to the inspection request.

Florida Keys permit and inspection. ACG handles permit submittal coordination with the GC and the Florida Keys building department. We pull the NOA or FL# documentation current at submittal, align the shop drawings with the approved configuration, and document the field installation against the installation instructions with a photo log. The result: Florida Keys commercial storefront installations close out at certificate of occupancy without surprise items at the building department.

Manufacturer relationships. ACG is an installer of the commercial storefront product lines we specify, with direct factory engineering support on configuration selection, design pressure, and NOA or FL# documentation. We do not bid a storefront system and then quietly substitute a less-rated competitor product at fabrication time. The product the architect specified is the product we install.