American Commercial Glass (ACG) is the licensed commercial storefront glazier serving Bonita Springs, Florida and Lee County. We hold Florida CGC #1531993, carry $3M general liability and $6M aggregate bonding, and we’ve installed storefront aluminum and impact glass on 350+ commercial projects across the state.
If you need a storefront bid for new construction, retrofit, post-storm replacement, or fire-rated openings in Bonita Springs, send drawings to [email protected] or call (772) 486-7711. Complete RFQ packages get a bid back in 48 hours.
Why storefront glazing in Bonita Springs is different.
Every Florida market has its own combination of building code, AHJ practice, and structural exposure. Here’s what specifically drives the Bonita Springs storefront environment.
Southwest Florida is FBC Wind Zone — Gulf coastal exposure
Collier, Lee, and Charlotte counties run design wind speeds of 170 mph for Risk Category II commercial buildings on coastal-exposed sites. The product approval pathway is Florida Product Approval impact-rated glazing — not HVHZ. ACG specs Miami-Dade NOA-equivalent assemblies on most SW Florida commercial scope because the cost difference is small and the document package travels cleanly.
Post-Ian and post-Milton continuous rebuild
Hurricane Ian (2022) caused catastrophic commercial damage across Lee and Collier counties. Hurricane Milton (2024) added additional damage. Two years on, the rebuild is still active — insurance-funded replacement, code-upgrade scope on existing buildings, and new commercial construction all flowing through the market simultaneously. ACG has run continuous rebuild scope since Ian, including Gulfside Twelve at Fort Myers Beach with NOA-certified impact glazing throughout.
Barrier island and waterfront factor
Sanibel, Captiva, Fort Myers Beach, Marco Island, and Pine Island sit on the most wind- and surge-exposed commercial real estate in Florida. Storefront installs here require elevated anchor specifications, marine-grade fasteners, and detailing for breakaway facade at the lowest occupied level on Velocity Zone (VE) sites. ACG carries this into the SW Florida barrier island scope by default. Naples office runs Collier, Charlotte and Lee county scope with dedicated project management presence.
Storefront systems we install in Bonita Springs.
ACG is product-agnostic on storefront aluminum but opinionated on what works in this market. Here’s the working specification we recommend when there’s flexibility on system selection.
Standard 2″ × 4.5″ storefront framing with thermal break (451T) and ultra-thermal break (451UT) options. Miami-Dade NOA available. The default for office and retail when budget and schedule are tight.
2″ × 4.5″ flush-glazed storefront with butt-glazed vertical option. Used on high-end retail where the architect wants minimal mullion sightline. Miami-Dade NOA.
2″ × 4″ thermally broken aluminum. Lighter spec than 451T at lower cost. Common on QSR, retail strip, and tenant fit-out.
Colombian-manufactured impact storefront with high-spec finishes and large unit capability. ACG is an authorized commercial installer. Common on hospitality and resort scope.
Bi-fold and multi-slide impact-rated door systems for restaurants and indoor-outdoor retail. NOA for HVHZ. Specified across Florida hospitality.
20, 45, 60, 90, and 120-minute fire-rated storefront for occupancy separations and exit corridors. Pilkington Pyrostop glazing.
3/4″ or 1/2″ tempered all-glass entry sets with patch fittings (Dorma, Adams Rite). Used on retail anchor and standalone restaurant fronts.
Sliding and swing automatic door operators integrated into storefront framing. ACG coordinates with the access control trade and tunes operators at commissioning.
Where we work in Bonita Springs.
Same crew, same project manager, same submittal process across every Bonita Springs submarket.
Commercial scope in and near Bonita Springs.
A representative slice of recent ACG commercial portfolio relevant to the Bonita Springs market. Full Florida portfolio at acglass.com/portfolio.
The 48-hour bid process.
Send a complete RFQ package, get a line-itemized bid back in two business days.
Send your drawings
Architectural CDs plus structural anchorage details if available. Email [email protected] or upload at send-plans.html. ACG signs an NDA on request.
Takeoff & system selection
We take off the openings, verify NOA or FPA, and confirm the assembly with the manufacturer. Substitutions flagged explicitly.
Line-itemized bid
Aluminum, glass, hardware, anchors, sealant, labor, freight, mobilization — each on its own line. Schedule and lead time on the same page.
Award & mobilize
Contract executed, fabrication ordered, anchor submittals issued, pre-construction meeting scheduled. Bid held 30 days.
What commercial storefront costs in Bonita Springs.
Per-square-foot installed pricing for typical 2026 scope. Final number depends on system, finish, glass spec, hardware, and site conditions — the real number comes from the 48-hour bid.
| Scope | Description | Installed PSF (2026) |
|---|---|---|
| IGU re-glaze | Same frame, new insulating glass unit. | $45–$95 |
| Standard aluminum storefront | Kawneer 451T or YKK YES 45 FS with 9/16″ impact laminated glass, anodized finish. | $95–$145 |
| Premium aluminum storefront | Same systems with PVDF Kynar finish, custom mullion sizing, or large unit configurations. | $135–$185 |
| All-glass entrance set | 3/4″ tempered glass entry set with patch fittings and hardware. Per pair. | $8K–$22K each |
| Fire-rated storefront (60 min) | TGP Fireframes with Pilkington Pyrostop glazing, UL-listed assembly. | $175–$285 |
| Euro-Wall folding glass door | Impact-rated bi-fold restaurant door with NOA approval. Per linear foot installed. | $2,400–$3,800 LF |
| Curtain wall (reference) | Stick-built impact curtain wall with insulating laminated glass. | $135–$225 |
Ranges reflect typical 2026 Lee County commercial scope. Inside HVHZ (Miami-Dade, Broward), expect 8–15% higher.
Bonita Springs commercial storefront questions, answered.
Does ACG have an office near Bonita Springs?
Yes. Our Naples office covers Collier and Lee counties — the SW Florida market. Dedicated project management presence, not a satellite. The Naples office opened to support continuous post-Ian and post-Milton commercial rebuild work plus new construction.
Is Bonita Springs storefront HVHZ-rated?
No. SW Florida is not HVHZ (only Miami-Dade and Broward are). Storefront assemblies default to Florida Product Approval impact-rated glazing. ACG typically specs Miami-Dade NOA-equivalent assemblies anyway because the cost difference is small.
Can ACG handle post-Ian or post-Milton rebuild scope in Bonita Springs?
Yes. We've run continuous rebuild scope across Lee and Collier counties since Hurricane Ian in 2022, including Gulfside Twelve at Fort Myers Beach with NOA-certified impact glazing throughout. We coordinate with insurance adjusters on damage documentation and bid permanent replacement on the schedule the owner needs.
What does a commercial storefront glazier do in Bonita Springs?
A commercial storefront glazier installs and replaces the aluminum-framed glass facades at street level on commercial buildings — retail, restaurant, office, medical, and mixed-use. In Bonita Springs this typically includes Kawneer Trifab 451T, YKK AP YES 45 FS, Tubelite T14000, or ESWindows aluminum storefront framing with 9/16″ laminated impact glass. ACG handles the full scope: takeoff, NOA verification, anchor engineering, fabrication coordination, on-site install, sealant package, and final inspection.
Is ACG licensed to work in Lee County?
Yes. American Commercial Glass holds Florida Certified General Contractor license CGC #1531993, issued by the Florida DBPR. The license is statewide. ACG is bonded for $6M aggregate and carries $3M general liability. The license covers commercial glazing scope in Lee County and across Florida.
How fast can ACG bid a commercial storefront project in Bonita Springs?
48 hours on a complete RFQ package (drawings, scope, schedule, NOA requirements). Faster for repeat GC clients. We bid Division 08 only — we are a glazing subcontractor, not a general contractor on bid day.
How much does a commercial storefront cost in Bonita Springs?
Aluminum storefront with impact-rated 9/16″ laminated glass typically runs $95 to $145 per square foot installed in Bonita Springs for new construction. Re-glaze (same frame, new glass) runs $45 to $95 per square foot. Custom finishes (PVDF Kynar), large unit sizes, and curved/arched configurations add 15–35% to the base price. Outside HVHZ Florida (which includes Lee County) typical pricing runs 8-15% below the HVHZ counties. Full bid with line-item breakdown comes back in 48 hours.
What storefront systems does ACG install in Bonita Springs?
ACG installs Kawneer Trifab 451T and 451UT, YKK AP YES 45 FS and YHC 300 OG, Tubelite T14000 series, ESWindows ES-8000 commercial storefront, and Euro-Wall folding glass walls for restaurants. We are an authorized commercial installer for ESWindows and Euro-Wall. For fire-rated openings we install TGP Fireframes and Pilkington Pyrostop glazing.
What's the difference between storefront and curtain wall?
Storefront is an aluminum framing system designed for the ground floor — typically up to 10 feet tall with center-set glazing. Curtain wall is engineered for multi-story applications with structural load capacity and pressure-equalized rain screen design. Storefront uses 4-inch face dimension framing on standard scope; curtain wall uses 2.5-inch face on stick or 4-inch on unitized. Most ground-floor retail, restaurant, and office scopes are storefront. Multi-story tower facades are curtain wall.
Can ACG handle emergency storefront repair in Bonita Springs?
Yes. Board-up service is typically same-day or next-morning in Lee County during business hours. Permanent replacement timing depends on glass and frame availability — IGU replacement on in-stock sizes is 2-4 weeks, full storefront replacement on custom sizes is 6-12 weeks. ACG runs a separate emergency dispatch number after-hours for active GC clients.
Are you an authorized ESWindows and Euro-Wall installer?
Yes. ACG is an authorized commercial installer for both ESWindows and Euro-Wall in Florida. ESWindows is the high-spec Colombian-manufactured commercial aluminum and impact line. Euro-Wall is the impact-rated bi-fold and multi-slide door system specified across Florida hospitality. Both manufacturers verify our authorization directly — we'll provide the certificate on request.
Can ACG do design-build storefront work or only bid-build?
Both. We bid spec'd drawings (typical GC-led commercial work) and we engage as design-build partners when owners want a single accountable party for the storefront package. Design-build typically saves 6-10 weeks on schedule and 8-15% on cost because we control fabrication scheduling, anchor design, and AHJ submittals in parallel rather than sequentially.
Storefront glazier coverage across Florida.
ACG runs continuous commercial storefront scope across 11 major Florida markets. Same license, same crew structure, same 48-hour bid process.
About the author.
This page is written by the President of ACG, not by an outsourced content shop. Every spec, price, and code reference is one we’ve seen in the field.
Get a real Bonita Springs storefront number in 48 hours.
Send drawings, scope, and schedule. We’ll come back with a line-itemized bid, system recommendation, and a lead-time commitment. No mystery numbers.