American Commercial Glass (ACG) is the licensed commercial storefront glazier serving Jensen Beach, Florida and Martin County. We hold Florida CGC #1531993, carry $3M general liability and $6M aggregate bonding, and we’ve installed storefront aluminum and impact glass on 350+ commercial projects across the state.
If you need a storefront bid for new construction, retrofit, post-storm replacement, or fire-rated openings in Jensen Beach, send drawings to [email protected] or call (772) 486-7711. Complete RFQ packages get a bid back in 48 hours.
Why storefront glazing in Jensen Beach is different.
Every Florida market has its own combination of building code, AHJ practice, and structural exposure. Here’s what specifically drives the Jensen Beach storefront environment.
Treasure Coast is FBC Wind Zone — coastal Atlantic exposure
Martin, St. Lucie, and Indian River counties run design wind speeds of 170 mph for Risk Category II commercial buildings on coastal sites. Same product approval pathway as Palm Beach County: Florida Product Approval impact-rated glazing is the standard. ACG specs Miami-Dade NOA-equivalent assemblies on most Treasure Coast commercial scope because the document package travels cleanly across South Florida markets.
The Treasure Coast development cycle
The Treasure Coast has been the most active residential and commercial development corridor in South Florida outside the Miami-Dade/Broward axis. The Tradition / St. Lucie West master-planned communities, the I-95 corridor north of Jupiter, and the Stuart / Martin County estate market drive continuous new commercial construction plus retrofit scope. ACG has delivered Treasure Coast scope including Baron Shoppes at Tradition, Indiantown High School, and ongoing portfolio across Martin and St. Lucie counties.
AHJ landscape
Each municipality runs its own building department: Stuart, Port St. Lucie, Fort Pierce, Vero Beach, Sebastian, Jensen Beach, Palm City. Unincorporated Martin County and unincorporated St. Lucie County route through their respective county building departments. Submittal preferences vary — ACG handles direct submittal or hands clean packages to the GC.
Storefront systems we install in Jensen Beach.
ACG is product-agnostic on storefront aluminum but opinionated on what works in this market. Here’s the working specification we recommend when there’s flexibility on system selection.
Standard 2″ × 4.5″ storefront framing with thermal break (451T) and ultra-thermal break (451UT) options. Miami-Dade NOA available. The default for office and retail when budget and schedule are tight.
2″ × 4.5″ flush-glazed storefront with butt-glazed vertical option. Used on high-end retail where the architect wants minimal mullion sightline. Miami-Dade NOA.
2″ × 4″ thermally broken aluminum. Lighter spec than 451T at lower cost. Common on QSR, retail strip, and tenant fit-out.
Colombian-manufactured impact storefront with high-spec finishes and large unit capability. ACG is an authorized commercial installer. Common on hospitality and resort scope.
Bi-fold and multi-slide impact-rated door systems for restaurants and indoor-outdoor retail. NOA for HVHZ. Specified across Florida hospitality.
20, 45, 60, 90, and 120-minute fire-rated storefront for occupancy separations and exit corridors. Pilkington Pyrostop glazing.
3/4″ or 1/2″ tempered all-glass entry sets with patch fittings (Dorma, Adams Rite). Used on retail anchor and standalone restaurant fronts.
Sliding and swing automatic door operators integrated into storefront framing. ACG coordinates with the access control trade and tunes operators at commissioning.
Where we work in Jensen Beach.
Same crew, same project manager, same submittal process across every Jensen Beach submarket.
Commercial scope in and near Jensen Beach.
A representative slice of recent ACG commercial portfolio relevant to the Jensen Beach market. Full Florida portfolio at acglass.com/portfolio.
The 48-hour bid process.
Send a complete RFQ package, get a line-itemized bid back in two business days.
Send your drawings
Architectural CDs plus structural anchorage details if available. Email [email protected] or upload at send-plans.html. ACG signs an NDA on request.
Takeoff & system selection
We take off the openings, verify NOA or FPA, and confirm the assembly with the manufacturer. Substitutions flagged explicitly.
Line-itemized bid
Aluminum, glass, hardware, anchors, sealant, labor, freight, mobilization — each on its own line. Schedule and lead time on the same page.
Award & mobilize
Contract executed, fabrication ordered, anchor submittals issued, pre-construction meeting scheduled. Bid held 30 days.
What commercial storefront costs in Jensen Beach.
Per-square-foot installed pricing for typical 2026 scope. Final number depends on system, finish, glass spec, hardware, and site conditions — the real number comes from the 48-hour bid.
| Scope | Description | Installed PSF (2026) |
|---|---|---|
| IGU re-glaze | Same frame, new insulating glass unit. | $45–$95 |
| Standard aluminum storefront | Kawneer 451T or YKK YES 45 FS with 9/16″ impact laminated glass, anodized finish. | $95–$145 |
| Premium aluminum storefront | Same systems with PVDF Kynar finish, custom mullion sizing, or large unit configurations. | $135–$185 |
| All-glass entrance set | 3/4″ tempered glass entry set with patch fittings and hardware. Per pair. | $8K–$22K each |
| Fire-rated storefront (60 min) | TGP Fireframes with Pilkington Pyrostop glazing, UL-listed assembly. | $175–$285 |
| Euro-Wall folding glass door | Impact-rated bi-fold restaurant door with NOA approval. Per linear foot installed. | $2,400–$3,800 LF |
| Curtain wall (reference) | Stick-built impact curtain wall with insulating laminated glass. | $135–$225 |
Ranges reflect typical 2026 Martin County commercial scope. Inside HVHZ (Miami-Dade, Broward), expect 8–15% higher.
Jensen Beach commercial storefront questions, answered.
Does Jensen Beach require HVHZ-rated storefront glass?
No. The Treasure Coast (Martin, St. Lucie, Indian River counties) is not HVHZ. Florida Product Approval (FPA) impact-rated glazing is the standard pathway. ACG typically specs Miami-Dade NOA-equivalent assemblies on Treasure Coast commercial scope for document consistency with South Florida.
Which office handles Jensen Beach commercial glazing for ACG?
Our West Palm Beach headquarters runs the Treasure Coast market. Drive time to most Treasure Coast submarkets is 30-75 minutes. We've delivered Treasure Coast scope including Baron Shoppes at Tradition, Indiantown High School, and ongoing portfolio across Martin and St. Lucie counties.
Can ACG handle Tradition / master-planned community scope near Jensen Beach?
Yes. The Tradition / St. Lucie West master-planned community is one of the most active commercial corridors on the Treasure Coast. We've delivered the multi-tenant retail program at Baron Shoppes at Tradition and run continuous scope through the Tradition development cycle.
What does a commercial storefront glazier do in Jensen Beach?
A commercial storefront glazier installs and replaces the aluminum-framed glass facades at street level on commercial buildings — retail, restaurant, office, medical, and mixed-use. In Jensen Beach this typically includes Kawneer Trifab 451T, YKK AP YES 45 FS, Tubelite T14000, or ESWindows aluminum storefront framing with 9/16″ laminated impact glass. ACG handles the full scope: takeoff, NOA verification, anchor engineering, fabrication coordination, on-site install, sealant package, and final inspection.
Is ACG licensed to work in Martin County?
Yes. American Commercial Glass holds Florida Certified General Contractor license CGC #1531993, issued by the Florida DBPR. The license is statewide. ACG is bonded for $6M aggregate and carries $3M general liability. The license covers commercial glazing scope in Martin County and across Florida.
How fast can ACG bid a commercial storefront project in Jensen Beach?
48 hours on a complete RFQ package (drawings, scope, schedule, NOA requirements). Faster for repeat GC clients. We bid Division 08 only — we are a glazing subcontractor, not a general contractor on bid day.
How much does a commercial storefront cost in Jensen Beach?
Aluminum storefront with impact-rated 9/16″ laminated glass typically runs $95 to $145 per square foot installed in Jensen Beach for new construction. Re-glaze (same frame, new glass) runs $45 to $95 per square foot. Custom finishes (PVDF Kynar), large unit sizes, and curved/arched configurations add 15–35% to the base price. Outside HVHZ Florida (which includes Martin County) typical pricing runs 8-15% below the HVHZ counties. Full bid with line-item breakdown comes back in 48 hours.
What storefront systems does ACG install in Jensen Beach?
ACG installs Kawneer Trifab 451T and 451UT, YKK AP YES 45 FS and YHC 300 OG, Tubelite T14000 series, ESWindows ES-8000 commercial storefront, and Euro-Wall folding glass walls for restaurants. We are an authorized commercial installer for ESWindows and Euro-Wall. For fire-rated openings we install TGP Fireframes and Pilkington Pyrostop glazing.
What's the difference between storefront and curtain wall?
Storefront is an aluminum framing system designed for the ground floor — typically up to 10 feet tall with center-set glazing. Curtain wall is engineered for multi-story applications with structural load capacity and pressure-equalized rain screen design. Storefront uses 4-inch face dimension framing on standard scope; curtain wall uses 2.5-inch face on stick or 4-inch on unitized. Most ground-floor retail, restaurant, and office scopes are storefront. Multi-story tower facades are curtain wall.
Can ACG handle emergency storefront repair in Jensen Beach?
Yes. Board-up service is typically same-day or next-morning in Martin County during business hours. Permanent replacement timing depends on glass and frame availability — IGU replacement on in-stock sizes is 2-4 weeks, full storefront replacement on custom sizes is 6-12 weeks. ACG runs a separate emergency dispatch number after-hours for active GC clients.
Are you an authorized ESWindows and Euro-Wall installer?
Yes. ACG is an authorized commercial installer for both ESWindows and Euro-Wall in Florida. ESWindows is the high-spec Colombian-manufactured commercial aluminum and impact line. Euro-Wall is the impact-rated bi-fold and multi-slide door system specified across Florida hospitality. Both manufacturers verify our authorization directly — we'll provide the certificate on request.
Can ACG do design-build storefront work or only bid-build?
Both. We bid spec'd drawings (typical GC-led commercial work) and we engage as design-build partners when owners want a single accountable party for the storefront package. Design-build typically saves 6-10 weeks on schedule and 8-15% on cost because we control fabrication scheduling, anchor design, and AHJ submittals in parallel rather than sequentially.
Storefront glazier coverage across Florida.
ACG runs continuous commercial storefront scope across 11 major Florida markets. Same license, same crew structure, same 48-hour bid process.
About the author.
This page is written by the President of ACG, not by an outsourced content shop. Every spec, price, and code reference is one we’ve seen in the field.
Get a real Jensen Beach storefront number in 48 hours.
Send drawings, scope, and schedule. We’ll come back with a line-itemized bid, system recommendation, and a lead-time commitment. No mystery numbers.